1” Slate
1 1/4” Thick Arched Cabinet
Hand Carved Rams Horn Legs
Solid Steel Corner Brackets
Double Cross Beams
Hand tooled leather pockets
6” Rails with Diamond sites
Cabinet and Hardware
The Oak Veneer cabinet is 1 1/4 inches thick. A sturdy 4 1/2" Solid Hardwood center beam runs the length of the table and double cross beams tie the sides of the cabinet together. All of the connections within the cabinet are secured with steel hanger brackets pre-threaded steel receivers recessed into the cabinet. The Fruitwood Finish of this table is hand rubbed; sanded, sealed and then a pre-catalyzed lacquer is applied for a long lasting depth, sheen and beauty.
Leg Style
The solid hardwood legs are hand carved and attach to the cabinet via a unique solid steel corner bracket. The steel bracket is bolted to the cabinet and legs with steel bolts and pre-threaded receivers recessed into the cabinet. This provides for uncompromising strength and rigidity.
Rails and Cushions
The 6" wide-profile top rails are made of Solid Oak. A 2 piece floating t-nut fastening plate secures the rails and aprons directly to the slate bed for a precision fit. Mother of Pearl precision inlaid Diamond sites. The BCA Approved K-66 profile cushions are made 100% natural gum rubber. Solid hardwood sub-rails are designed to deliver optimal ball response. The thick, dense rails provide solid resistance to the ball and allow for precise cushion energy transference.
Pockets and Slate
Genuine Leather Pockets wrapped around a die cast iron core for beauty and durability. The balls are held in a leather mesh pocket decorated with fringe.
1” Slate
We always uses 3 piece, oversized Slate, diamond honed and perfectly matched. This provides a consistent and absolutely level playing surface. This is the same slate used in tables our competitors sell for $1000'S MORE.
Shipping and Handling is $99 to Continental US
We ship via North American Van Lines to most Addresses in the Continental US. The Address must be accessible by a standard delivery vehicle. Remote or inaccessible addresses may incur additional charges. Delivery is to your garage. The Freight carrier will not remove shipping materials and cannot enter your home.
Assembly, leveling and felt installation is required on all of our tables. Professional installation is advised. Please check the YAHOO Yellow Pages under Billiard Service for an installer in your area. The AMUSEMENT industry is also a good source for local installation. (They are the folks who install and service the bar tables and coin-op tables around the country)
|
